ROBOTICS

Millions of flex cycles.
Zero signal degradation.

High-flex, compact circular and rectangular connectors for industrial robots, collaborative robots (cobots), AGVs/AMRs, and end-effector tool changers.
ROBOTICS REQUIREMENTS
Connectors that move with the machine
Robot connectors face a unique torture test: millions of bending cycles at the wrist joint, constant torsion in the arm, vibration from high-speed pick-and-place, and tight space constraints in compact cobot designs. Every connector must be small enough to fit, tough enough to last, and reliable enough for lights-out manufacturing.
🔁

High-Flex Life

10+ million flex cycles tested. Special cable strain relief and contact designs that prevent work-hardening and fatigue failure. Suitable for 6-axis robot wrist joints and cable tracks.

📏

Compact & Lightweight

Miniature circular connectors down to M5/M8 form factor. High-density contact arrangements in minimal shell sizes. Critical for end-effectors and cobot joints where every gram counts.

🔌

Power + Signal Hybrid

Mixed-layout connectors carrying servo power, encoder feedback, sensor signals, and gigabit Ethernet in a single compact shell. Reduces cable count and simplifies harness routing.

🔄

Tool Changer Interfaces

Quick-change connector plates for robotic tool changers. Automatic alignment, blind-mating capable, and rated for 100,000+ mate/demate cycles without contact wear.

Building Robots or Automation Cells?

Tell us about your robot platform, joint requirements, and signal/power mix. We'll recommend connectors rated for millions of cycles within 8 hours.

Request Robotics Quote →

Email: info@airoadcon.com · Phone: +86-189-9192-7716