Receptacle · Gold plated · Solder cup contacts · Shell sizes 1-5 · 9 to 50 positions
M24308/5
Receptacle, gold plated, solder contacts
1, 2, 3, 4, 5
9, 15, 25, 37, 50
Size 20 standard density
Solder cup
Gold over nickel underplate
Steel or aluminium alloy
Cadmium, zinc-nickel, electroless nickel, olive drab, black anodize or gold
G (MIL-DTL-24308 qualified)
500
-55 °C to +125 °C (Class G)
500 mating cycles
Panel / rack mount, straight or right-angle PCB
Thermoplastic (approved per MIL-DTL-24308)
M24308/7 plug (solder) and M24308/8 plug (crimp)
/1 nickel solder receptacle · /2 nickel crimp receptacle · /3 nickel solder plug · /4 nickel crimp plug
-1 = 9 pos, -2 = 15, -3 = 25, -4 = 37, -5 = 50
MIL-DTL-24308 / IEC 60807-3 / DIN 41652
| Brand | Equivalent Part Number |
|---|---|
| Airoadcon | M24308/5-1 through M24308/5-5 |
| ITT Cannon | M24308/5 (D/DM series) |
| Positronic | M24308/5 |
| Amphenol | M24308/5 |
| Glenair | M24308/5 equivalent / HiPer-D |
The M24308/5 slash sheet is the gold-plated solder-contact receptacle in the MIL-DTL-24308 D-subminiature family — the counterpart to the nickel-plated /1 receptacle. Gold plating is specified where contact resistance stability matters more than unit cost: low-level signal circuits, thermocouple and instrumentation wiring, and anything that will sit un-mated for long periods in humid or corrosive environments, because gold does not form the oxide layer that raises resistance on a bare or nickel-only contact. The solder-cup termination suits harnesses built on a bench and potted or laced before the connector goes into the rack, whereas the crimp slash sheets (/2, /6) are used when a harness has to be built in place. Shell sizes 1 through 5 cover 9, 15, 25, 37 and 50 positions with size 20 contacts, and the same shell will accept plug halves from /7 (gold solder) or /8 (gold crimp).
Need M24308/5?
Cross-brand compatible. Free samples available. 4-week lead time on standard configurations.
Email: info@airoadcon.com | Phone: +86-189-9192-7716