MIL-DTL-26482 Series 1 · MS3111 cable receptacle · Shell 12 · Arrangement 12-10 · 10 x #20 pin · Class F
MIL-DTL-26482 Series 1 (solder, bayonet)
MS3111 in-line cable receptacle
F - grommet seal with strain relief clamp
12
12-10
10
#20
Pin (male)
Solder
7.5 A per contact
850 V DC / 600 V AC rms
20 - 24 AWG
3-point bayonet, 1/3 turn quick disconnect
5
Aluminium alloy
Olive drab cadmium over zinc (RoHS variants available)
Gold over nickel
-55°C to +125°C (200°C silicone options)
Environmentally sealed when mated with accessory
500 mating cycles minimum
QPL
MIL-DTL-26482 Series 1 is a solder-contact specification with a one-piece synthetic-rubber insert and five keyways for alignment, coupled by a three-point bayonet that engages in a third of a turn. The Series 1 and Series 2 families are intermateable, intermountable and interchangeable at the same shell size and arrangement — so a 12-10 Series 1 cable receptacle mates a 12-10 Series 2 box-mount receptacle, which is what makes it practical to mix solder harness ends with crimp panel connectors.
| Airoadcon | Equivalent source 1 | Equivalent source 2 | Equivalent source 3 |
|---|---|---|---|
| Airoadcon / AVIC | MS3111F12-10P | ||
| Amphenol | PT01F-12-10P | ||
| ITT Cannon | KPT01F12-10P | ||
| Souriau | 85101F12-10P |
Solder-contact 26482 connectors remain in production because a soldered joint is more tolerant of a field repair with hand tools than a crimp that requires a calibrated tool and the correct contact positioner. Where the harness is built once and the connector is not re-terminated in service, solder is a lower-capital route. Airoadcon supplies Series 1 in both solder and PCB-contact versions.
Need MS3111F12-10P?
Cross-brand compatible. Free samples available. 4-week lead time on standard configurations.
Email: info@airoadcon.com | Phone: +86-189-9192-7716
Request Quote / Sample