MIL-DTL-28840 · Plug with 45° strain relief (19) · Insert arrangement A · Shell G · Contact style P (pin) · Key 1
MIL-DTL-28840 (MIL-C-28840)
M28840/19
Plug connector with 45° strain relief backshell
A
G (13)
1
P (pin)
1 (of 6)
AWG 20
AWG 20 to AWG 28
Crimp, rear insert / front release
Threaded, scoop-proof
Aluminium alloy / corrosion-resistant steel options
Cadmium, zinc-nickel, tin-zinc (non-reflective)
Grommet and seal, IP67 unmated
RFI / EMI shielded
Shipboard, deck, naval weapons and C4ISR interconnect
QPL
M28840/19 is the 45° member of the backshell triad: /17 straight strain relief, /18 90°, /19 45°. Choosing between them is a cable-routing decision. Where a run must leave a rack at an angle that is neither straight out nor a full right angle, the 45° accessory takes the bend without loading the contact retention system. As with the rest of the family, the plug body is marked M28840/16 and the accessory carries its own slash-sheet part number, so the two are ordered separately.
Fully intermateable and interchangeable with any qualified M28840 connector irrespective of manufacturer.
| Airoadcon | Equivalent source 1 | Equivalent source 2 | Equivalent source 3 |
|---|---|---|---|
| Airoadcon | M28840/19AG1P1 | ||
| Amphenol | M28840/19AG1P1 | ||
| Glenair | M28840/19AG1P1 | ||
| TE / Deutsch | M28840/19AG1P1 |
The 45° and 90° backshells are common across the M28840 range, which means a single accessory part number covers every shell size in the family. That reduces spares holding for a ship's connector locker considerably, since the same backshell can be redeployed when an equipment bay is reconfigured. Airoadcon stocks the full accessory range alongside the connector bodies.
Need M28840/19AG1P1?
Cross-brand compatible. Free samples available. 4-week lead time on standard configurations.
Email: info@airoadcon.com | Phone: +86-189-9192-7716
Request Quote / Sample