5x #12 · Pin (Male) · Shell 18 · Insert 18-11 · Class W · Threaded coupling
MS3450W18-11P
MIL-DTL-5015 Series III
MIL-DTL-5015 Series III — threaded coupling, heavy-duty power and control
3450 — Wall Mount Receptacle
Square-flange wall mount receptacle
18
18-11
5x #12
Pin (Male)
#12
23 A per #12 contact
16-12 AWG
Solder cup
Threaded, 5/8-24 UNEF class for the 10SL shell and equivalent UNEF/UNS threads by shell size
Class W — olive drab cadmium over aluminium alloy
Aluminium alloy
Silver
-55 °C to +125 °C
500 hours (cadmium finishes)
500 mating cycles
Environmental when mated, resilient insert and gasket
Polychloroprene / synthetic rubber
Amphenol 97 series, ITT Cannon MS / CA, Souriau 851, TE
MS + shell style + class letter + shell size + arrangement + contact gender
| Airoadcon / MIL | Amphenol 97-series | ITT Cannon | Souriau | MS3450W18-11P | 97-345018-11P | MS3450W18-11P | MS3450W18-11P |
|---|
MIL-DTL-5015 Series III is the successor generation of the classic MIL-DTL-5015 threaded-coupling circular connector, and is the standard choice for heavy-duty power and control circuits on machinery, vehicles and ground-support equipment. Shells couple with a threaded ring rather than a bayonet, so they resist vibration and are slower to disconnect — deliberate for circuits that must not open accidentally. Contact sizes run from #16 at 13 A through #12 at 23 A and #8 at 46 A to #4 at 80 A, so one shell can carry a mix of control and power circuits. Series II and Series III differ in insert retention and environmental detail but share the shell threads and insert arrangements. Airoadcon supplies solder-cup contacts and, on request, a kit with the mating half and a backshell.
Need MS3450W18-11P?
Cross-brand compatible. Free samples available. 4-week lead time on standard configurations. Email: info@airoadcon.com | Phone: +86-189-9192-7716
Request Quote / Sample