MS27506A20-2 · Straight Strain Relief Clamp · Shell Size 20 · MIL-DTL-38999 Series I / II accessory
MS27506 (MIL-DTL-38999 accessory; QPL)
Straight strain relief cable clamp
A
20
2
MIL-DTL-38999 Series I and II bayonet; MS3110 / MS3111 / MS3112 / MS3114 / MS3116
Cable support and strain relief: carries harness load into the connector shell
Threads onto the connector accessory thread; no special tooling required
Floating clamp halves grip the cable bundle evenly
Jacketed cable, or unjacketed wire run in tubing
Aluminum alloy
Per the MS27506 dash-number table
QPL — identical part number from every qualified source
MS27506A20-2 is an MS27506 strain relief cable clamp for MIL-DTL-38999 Series I and Series II bayonet connectors and their MS3110 / MS3111 / MS3112 / MS3114 / MS3116 equivalents. It threads onto the connector accessory thread behind a shell size 20 connector and clamps the harness, so that pulling or vibration on the cable is transferred into the shell instead of into the crimp contacts. The dash code carries the shell size and clamp variant, and under MIL/AS QPL rules the same part number is supplied by every qualified source.
Avionics, airframe and engine harnesses, ground support equipment, radar and sensor interconnect — any MIL-DTL-38999 Series I / II installation exposed to cable pull or vibration.
| Brand | Equivalent Part Number |
|---|---|
| Airoadcon | MS27506A20-2 |
| Amphenol / Amphenol PCD | MS27506A20-2 |
| Glenair | MS27506A20-2 |
| TE Connectivity | MS27506A20-2 |
Need MS27506A20-2?
Cross-brand compatible. Free samples available. 4-week lead time on standard configurations.
Email: info@airoadcon.com | Phone: +86-189-9192-7716